HAZWOPER 24 Hour

Class tabs

Class Information
Official Title: 
24 Hour HAZWOPER Training

Workers who are only occasionally or unlikely to come into contact with hazardous materials, who do not require OSHA 40 Hour HAZWOPER certification, but are still required to take HAZWOPER training, are best served by taking OSHA 24 Hour HAZWOPER training.

The objectives of this course are to meet the Federal OSHA HAZWOPER training requirements of 29 CFR 1910.120(e)(3)(ii) or 29 CFR 1910.120(e)(3)(iii) for General Industry, and 1926.65(e)(3)(ii) or 1926.65(e)(3)(iii) for Construction. This course is also intended to meet any HAZWOPER training requirements for EPA and State OSHA regulations.

Per 29 CFR 1910.120(e)(3)(ii) and 1926.65(e)(3)(ii)

Workers on site only occasionally for a specific limited task (such as, but not limited to, ground water monitoring, land surveying, or geophysical surveying) and who are unlikely to be exposed over permissible exposure limits and published exposure limits shall receive a minimum of 24 hours of instruction off the site, and the minimum of one day actual field experience under the direct supervision of a trained, experienced supervisor.

Per 29 CFR 1920.120(e)(3)(iii) and 1926.65(e)(3)(iii)

 

Workers regularly on site who work in areas which have been monitored and fully characterized indicating that exposures are under permissible exposure limits and published exposure limits where respirators are not necessary, and the characterization indicates that there are no health hazards or the possibility of an emergency developing, shall receive a minimum of 24 hours of instruction off the site, and the minimum of one day actual field experience under the direct supervision of a trained, experienced supervisor.

Training Dates: 
Oct 24-2018 to Oct 26-2018
Training Days: 
3
Training Hours: 
24.00
Program Cost: 
Tuition Books NOT provided by AVTEC Room & Board Student Service Fee Supplies Tech Fee Total
$150 N/A N/A $246 N/A N/A N/A $396
Back to Top